Description

Dimensions
A Overall Operating Height – Fully Raised 139.6″
B Height to Hinge Pin – Fully Raised 108.1″
C Overall Height to Top of ROPS 70.3″
D Overall Length with Bucket 114″
E Dump Angle at Full Height 42°
F Dump Height 84.5″
G Dump Reach at Full Height 22.8″
J Rollback at Ground 29°
M Rollback Angle at Full Height 99°
O Seat to Ground Height 32.6″
P Wheelbase 34.5″
Q Overall Width – Less Bucket A 48.4″
R Bucket Width 55″
S Ground Clearance to Chassis 6.0″
V Overall Length – Less Bucket 88.9″
W Departure Angle 26°
X Clearance Circle – Front w/ Bucket 69.4″
Y Clearance Circle – Front w/o Bucket 44.1″
Z Clearance Circle – Rear 54.1″
Standard Specification Tire Size 27×8.5×15 HD
Engine
Make Yanmar
Model 3TNV88C-KMS
Tier IV
Gross Power @ 2500 rpm 25.5 hp
Net Power @ 2500 rpm 24.7 hp
Maximum Torque 80 ft.-lbs. @ 1680
Displacement 100 cu.in.
Hydraulic System
Auxiliary Hydraulics – Standard 14.5 gpm
High-Flow Auxiliary Hydraulics – Option N/A
Reservoir Capacity 8 gal.
Electrical System
Battery 12-volt
Starter 12-volt
Alternator 40-amp
Capacities/Weights
Rated Operating CapacityB 1,050 lbs.
Rated Operating Capacity with Optional CounterweightB 1,175 lbs.
Fuel Tank 10.4 gal.
Travel Speed – Maximum 5.9 mph
Travel Speed with Two-Speed Option – Maximum N/A
Operating WeightC – Approximate 4,000 lbs.

A – Overall width is dependent upon the amount of wheel offset.

B – Per SAE J818, SAE J732, and ISO 14397

C – Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 79 kg operator.