Description

Specifications (standard)
Dimensions
A Overall Operating Height – Fully Raised 152.6″
B Height to Hinge Pin – Fully Raised 119″
C Overall Height to Top of ROPS 76.7″
D Overall Length with Bucket 122.1″
E Dump Angle at Full Height 38°
F Dump Height 93.7″
G Dump Reach at Full Height 22.8″
J Rollback at Ground 28°
M Rollback Angle at Full Height 99°
O Seat to Ground Height 35.6″
P Wheelbase 38.9″
Q Overall Width – Less Bucket A 63.2″
R Bucket Width 61.5″
S Ground Clearance to Chassis 6.3″
V Overall Length – Less Bucket 93.9″
W Departure Angle 21°
X Clearance Circle – Front w/ Bucket 73.6″
Y Clearance Circle – Front w/o Bucket 45.4″
Z Clearance Circle – Rear 57.7″
Standard Specification Tire Size 10.00 x 16.5 HD

Engine
Make Yanmar
Model 4TNV98C-NMS2
Tier IV
Gross Power @ 2500 rpm 69.9 hp
Net Power @ 2500 rpm 68.4 hp
Maximum Torque 178 ft.-lbs. @ 1625
Displacement 201.4 cu.in.

Hydraulic System
Auxiliary Hydraulics – Standard 18.9 gpm
High-Flow Auxiliary Hydraulics – Option N/A
Reservoir Capacity 11 gal.

Electrical System
Battery 12-volt
Starter 12-volt
Alternator 100-amp

Capacities/Weights
Rated Operating CapacityB 1,650 lbs.
Rated Operating Capacity with Optional CounterweightB 1,800 lbs.
Fuel Tank 16.5 gal.
Travel Speed – Maximum 7.8 mph
Travel Speed with Two-Speed Option – Maximum N/A
Operating WeightC – Approximate 6,165 lbs.

A – Overall width is dependent upon the amount of wheel offset.

B – Per SAE J818, SAE J732, and ISO 14397

C – Weight of base unit with standard equipment, standard tires (heavy-duty flotation), standard dirt-construction bucket and 175 lb. operator.