Home/New Equipment/Gehl/Telescopic-Handlers/RS6-34 Telescopic Handler

RS6-34 Telescopic Handler


Rated Lift Capacity (kg): 6,000 lbs. (2722)
Gross Power (kW): 74 hp (55)
Maximum Lift Height (m): 34′ 3″ (10.4)
Maximum Forward Reach (m): 23′ 3″ (7.0)

Specification Sheet/Brochure



Gehl RS6-34 Telehandler
The model RS6-34 is built with high quality components for proven performance.

Welded box-section boom design for maximum load placement ability.
Well-thought-out cylinder design provides one of the fastest cycle times in the industry.
Frame leveling feature adjusts 10-degrees to the left and right, for level performance on uneven terrain.
Internal wet disc brakes provide excellent braking and long life.
Dual-element air filter protects the engine from airborne contaminants, increasing engine performance and longevity.
Operator’s Cabin

The RS6-34 Telescopic Handler features a durable operator’s compartment to maximize comfort and productivity.

44 cubic-foot cab enclosure provides optimal leg room and a spacious operating environment.
ROPS/FOPS canopy is standard equipment; ROPS/FOPS enclosed cab is optional.
Virtually 360-degree visibility increases safety and operating accuracy.
Deluxe high-back seat maximizes operator comfort. Adjustable suspension seat is optional.
Side and rear glass is standard equipment.

In 4 wheel steer the machine turn radius can be as small as 12′ 6″ for machine positioning on tight job sites.

Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.
Turning Radius (m) 12’6″ (3.8)

The RS6-34 Telescopic Handlers provides the power to get work done effectively and efficiently.

Engine shutdown protection feature allows 30-seconds of run time for moving the unit to a safe location for repair.
Dana three-speed power-shift transmission is easy to maintain.
Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces.
Manufacturer Deutz
Model TD 3.6 Tier IV
Power (kW) 74 hp (55)
Maximum Travel Speed (km/hr) 18.0 mph (28.9)
Rated Speed 2,300 rpm

The model RS6-34 has the hydraulic system power to get the job done.

Dual-function, pilot-assisted joystick is standard equipment.
Optional tri-function, pilot-assisted joystick allows the operator to set forktilt and auxiliary function speeds.
Auto-leveling feature keeps loads level when raising/lowering the boom.
Pump Type Gear
Total Capacity (L/min) 29 gpm (110)
System Pressure (bar) 3,000 psi (207)
Hydraulic Reservoir Capacity (L) 35 gal. (133)RS6-34_Hydraulics

There is a tool for every job, and the RS6-34 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease.

A Carriages – Masonry, framing and standard carriages available in different widths.
B Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide.
C Fork Shift – 50″ (1270 mm) wide.
D Jib Boom – 5′ (1.5 m) with winch and 60′ (18.3 m) cable.
E Bucket – Light Material – 76″ (1.3 cu.yd)
F Work Platform – 4′ x 9.5′ – Fork Mounted (requires PWP)
G Carriage – Side Shift 48″ wide
H Truss Boom – 8′ long
I Auger Drive and 9′ – 12′ – 18′ diameter augers

Plenty of access points and over-sized covers make service and maintenance on the RS6-34 quick and efficient.

Over-sized front cover provides easy access to the hydraulic reservoir and hydraulic pressure ports for service and testing.
Side-mounted fuel tank with battery access and an additional storage compartment.
Lockable rear-side covers located on both sides of the machine slide out of the way to expose the engine for service.
Shorter hoses from main valve to boom provide compact hose routing, enhancing serviceability.