Home/New Equipment/Gehl/Telescopic-Handlers/RS9-50 GEN:2 Telescopic Handler

RS9-50 GEN:2 Telescopic Handler


Rated Lift Capacity (kg): 9,000 lbs. (4082)
Gross Power (kW): 120 hp (89)
Maximum Lift Height (m): 50′ 1″ (15.3)
Maximum Forward Reach (m): 36′ 7″ (11.2)

Specification Sheet/Brochure



Gehl RS9-50 GEN:2
The model RS9-50 GEN:2 is built with high quality components, for long life and superior performance.

Land 5,000 lbs at 47′ 0″ high without moving the machine.
Additional reach of 50′ 0″ telescopic boom provides greater work range and material placement ability than competitive 42′ 0″ or 44′ 0″ units..
Boom tip lift hook option is now available as a factory-installed option or field installed option.
Proven welded box-section telescopic boom design maximizes material lift and placement.
Cylinder design provides one of the fastest cycle times in the industry.
Frame leveling feature adjusts 10-degrees to the left and right, for level performance on uneven terrain.
Internal wet disc brakes provide excellent braking and long life.
Dual-element air filter protects the engine from airborne contaminants, increasing engine performance and longevity.
Operator’s Cabin

The RS9-50 GEN:2 Telescopic Handler features spacious, durable operator stations to maximize comfort and productivity.

44 cubic-foot cab enclosure provides optimal leg room and a spacious operating environment.
ROPS/FOPS canopy is standard equipment; ROPS/FOPS enclosed cab is optional.
Virtually 360-degree visibility increases safety and operating accuracy.
Deluxe high-back seat maximizes operator comfort. Adjustable suspension seat is optional.
Side and rear glass is standard equipment.
Gehl RS6-42 Telehandler Operator Cabin

Gehl RS6-42 Telehandler Steering
Three steering modes – 4-wheel, 2-wheel and crab – enhance maneuverability and are easily changed by the flip of a switch.

In 4-wheel steer, the machine has a 13′ 8″ turning radius for machine positioning on tight job sites..
Turning Radius (m) 13’8″ (4.2)
Remote Boom Control

The Remote Boom Control or PWP is not available on the RS 9-50 GEN:2.


Gehl RS8-42 Engine Access
The RS9-50 GEN:2 Telescopic Handlers provides the power to get work done effectively and efficiently.

Dana four-speed power-shift transmission is easy to operate.
Limited-slip differential in the front axle provides additional traction in muddy and unimproved surfaces.
Manufacturer Cummins
Model QSF 3.8 Tier IV
Power (kW) 120 hp (89)
Maximum Travel Speed (km/hr) 19.6 mph (31.5)
Rated Speed 2,500 rpm

The model RS9-50 GEN:2 has outstanding hydraulic system and control performance.

Dual-function, pilot-assisted joystick is standard equipment.
Optional tri-function, pilot-assisted joystick allows the operator to set fork tilt and auxiliary function speeds.
Boom tip auxiliary hydraulics are standard to power hydraulic operated attachments.
Auto-leveling feature keeps loads level when raising/lowering the boom.
Pump Type Gear
Total Capacity (L/min) 41.5 gpm (157)
System Pressure (bar) 3,000 psi (207)
Hydraulic Reservoir Capacity (L) 45 gal. (170)Gehl RS6-42 Telehandler Hydraulics

Gehl RS6-42 GEN:2 Telehandler Attachment System
There is a tool for every job, and the RS6-42 GEN:2 can power them all. Dynattach® Quick-Attach system allows quick attachment changes with unsurpassed ease.

A Carriages – Masonry, framing and standard carriages available in different widths.
B Rotating Carriage – 48” (1219 mm) and 66” (1676 mm) wide.
C Fork Shift – 48″ (1219 mm) wide.
D Personnel Work Platforms – 180° swing platform and 48” x 50” x 114” (1219 mm x 1270 mm x 2895 mm) platform.
E Swing Carriage – 90° and 180° swing.
F Log and Pipe Grapple – 78″ wide.
G Jib Boom – 5′ (1.5 m) with winch and 60′ (18.3 m) cable.
H Truss Boom – 15′ (4.5 m) with optional winch.Gehl RS6-42 GEN:2 Telehandler Boom Hook Attachment System
Boom Tip Lift Hook

This factory-installed option provides a secure lifting point for handling suspended loads without the use of an additional attachment.
The lift capacity remains the same as a standard carriage, while the quick attachment point increases versatility and reduces downtime.

Plenty of access points and over-sized covers make service and maintenance on the RS9-50 GEN:2 quick and efficient.

Over-sized front cover provides easy access to the hydraulic reservoir and hydraulic pressure ports for service and testing.
Side-mounted fuel tank with battery access and an additional storage compartment.
Lockable rear-side covers located on both sides of the machine slide out of the way to expose the engine for service.
Shorter hoses from main valve to boom provide a compact hose routing, enhancing serviceability.